Getting started
www.kodak.com/go/support
2
Inserting the battery
CAUTION:
Use only a Kodak EasyShare rechargeable Li-Ion battery.
1 Turn the Mode dial to Off.
2 On the bottom of the camera, slide the battery door
and lift to open.
3 Insert the battery as shown. Tilt the battery so the
battery lock is pushed to the side. Push the battery
into the battery compartment.
The battery lock holds the battery in place.
4 Close the battery door.
Setting the date and time
Setting the date & time, first time
The
Date and Time have been reset
message appears the first time you turn on the
camera or if the battery is removed for an extended time.
1 SET DATE & TIME is highlighted. Press the OK button.
2 Go to step 4 in Setting the date & time, anytime.
Battery
lock
To Next Page
Loading...
