9 www.kodak.com/go/support
Taking pictures and videos
Using optical zoom
Use optical zoom to get up to 4X closer to your subject. Optical zoom is effective
when the lens is no closer than 29.5 in. (75 cm) from the subject. You can change
optical zoom before (but not during) video recording.
1 Use the viewfinder or camera screen to frame your
subject.
2 Pull or push the Zoom button to zoom in (T) and
out (W).
If the camera screen is turned on, the zoom indicator
shows when you are in optical zoom range or in digital
zoom range.
3 Press the Shutter button halfway and hold to set
the exposure and focus, then press the rest of the
way down to take the picture. (When taking
videos, press and release the Shutter button.)
Using digital zoom
Use digital zoom in any still mode to get an additional 4X magnification beyond
optical zoom. Combined zoom settings are from 4.8X to 16X. You must turn on the
camera screen before activating digital zoom.
1 Press the Display/Info button to turn on the camera screen.
2 Pull the Zoom button to the optical zoom limit (4X). Release the button, then pull
it again.
The camera screen displays the zoomed image and the zoom indicator.
3 Press the Shutter button halfway and hold to set the exposure and focus, then
press the rest of the way down to take the picture.
NOTE: You cannot use digital zoom for video recording.
Zoom indicator
Digital zoom
Optical zoom
range
range
To Next Page
Loading...
Need help?
General
