19 www.kodak.com/go/support
Taking pictures and videos
Using exposure bracketing
1 Set the exposure bracketing interval. (See Exposure
Bracketing Interval, page 23.)
2 In any Still mode, press the Exposure Bracketing/
Burst button until appears in the status area.
3 Press the Shutter button halfway and hold to set the auto-focus and exposure.
4 Press the Shutter button the rest of the way down to take the pictures.
The camera takes 3 pictures. To evaluate them, press the Review button. Exposure
bracketing turns off after the pictures are taken.
NOTE: Exposure bracketing is not available in:
■ Night Portrait, Night Landscape, and Fireworks scene modes
■ Shutter and Manual priority modes when the shutter speed is greater than
0.7 seconds
Option Description Purpose
Exposure
Bracketing
The camera takes 3 pictures—one
at +, one at 0, and one at -
exposure.
Determine the best exposure level for your
conditions based on your evaluation of 3
pictures.
Exposure Bracketing/
Burst
To Next Page
Loading...
Need help?
General
