53 www.kodak.com/go/support
Troubleshooting
Camera ready light status
Status Cause
Ready light glows
steady green.
Shutter button is pressed halfway down. Focus and exposure are set.
Ready light blinks
green.
Picture is being processed and saved to the camera.
Pictures are being transferred to computer; camera is connected.
Camera firmware upgrade is in process.
Ready light glows
steady orange.
Camera is in Favorites mode.
Ready light blinks
orange.
Flash is not charged. Wait. Resume picture taking when the light stops
blinking and turns off.
Auto-exposure or auto-focus are not locked. Release the Shutter
button and recompose the picture.
Ready light blinks red
and camera turns off.
Battery is low or exhausted. Recharge the battery (page 1).
Ready light glows
steady red.
Camera’s internal memory or card is full.
Transfer pictures to the computer (page 46), delete pictures from the
camera (page 33), switch image storage locations (page 25), or insert
a card with available memory (page 5).
Camera processing memory is full. Wait. Resume picture taking when
the light turns green.
Card is read-only. Change image storage location to internal memory
(page 25), or use a different card.
Memory card speed is slow. Card cannot be used to take videos.
Change storage location to internal memory (page 25). Use this card
to take pictures only.
To Next Page
Loading...
Need help?
General
