the
KODAK
EKTAGRAPHIC
slide
projector
model
AF-2
FEATURES-The
KODAK
EKTAGRAPHIC
Slide Projector, Model AF-2 (Auto-
matic Focus), has
been
designed
for
professional slide presentations.
One
of the valuable features of this project
or
is the automatic focusing
device which keeps each slide in foc
us
throughout its projection.
You
will
find the
pr
ojector
to
be
an
exceptionally durable, dependable audiovisu
al
device-versatile
, easy
to
operate, effici
en
t in its functio
ns
. The features
that
distinguish
yo
ur p
ro
jector are the
se
:
• Automatic focusing is accomplished
by
a built-in electronic control.
• A choice of three Kodak trays is available
for
use with the Model AF·2
Projector.
Each
tray has convenient slide identification numbers.
•
The
KODAK
CAROUSEL
* Universal Slide Tray,
furnished
with the pro·
jector,
has
an
80-slide capacity and accepts glass and cardboard slides
up to
Va
inch
thick
. (The projector will also accommodate the
KODAK
CAROUSEL
Slide Tray and the
KODAK
CAROUSEL
140
Slide Tray.)
• Any transparency fo
rmat
in
a 2 x 2·inch mo
unt
c
an
be
projected,
including 126-size (26.5 x 26.5m m), 135·size (22.9 x
34.2mm
), 828-size
(26.2 x 38
mm)
, and 127-si
ze
(38 x 38m
m)
super-
sl
ides.
• A
timer
in the projector provides automatic changing of slides
for
5-, 8·, or 15-second periods. Split-second intervals between slides
el
iminate long dark-screen periods.
• Slides can
be
projected in forward or reverse sequence or
as
individ-
ually selected.
• A remote control with a 12-foot cord gives forward, reverse, and
focusing control away from the projector. Extension cords (see page 10)
can
be
added
if
needed .
• Focus
shift
of the projected image is minimized because all slides are
conditioned
by
warm air before projection.
• Preci
se
horizontal and vertical positioning
of
each slide is provided.
As
a result, screen images from two of these projectors can
be
exactly
superimposed. Accurate image registration depends upon carefully
mounted transparencies.
• The illuminated control panel includes a 4·position Selector Switch
for
OFF,
FAN
, and
LOW
and HIGH light output.
• Noise is minimized
by
low blower speed .
• Elevation and leveling controls are provided.
• The
300·watt
ELH
lamp produces less heat than a 500-watt
CSA
lamp,
but offers equivalent light output.
• A lamp ejector lever simplifies lamp replacement.
• The heat-absorbing glass and condenser lens are held in place in-
dependently of any other mechanism. This means
that
a new lamp
can
be
installed without danger of accidentally displacing these optics.
• The projector is wired
to
accommodate the
KODAK
CAROUSEL
Dissolve
Control (see page 11).
' All CAROUSEL
equipment
mentioned in
this
manual can
be
used
with
the
KODAK
EKTAGRAPHIC Slide Projector, Model
AF
·2.
HEIGHT
WIDTH
LENGTH
WEIGHT
POWER
REQUIREMENTS
PROJECTION LAMP
FURNISHED
AVAILABLE LENSES
SPECIFICATIONS
4 inches
(102mm)
with
tray-6Y16 inches
(l54mm)
10
3
A inches
(27lmm)
11%
inches
(289mm)
10Y2 pounds
(4.76kg)
110
to
125
volts,
60
Hz,
400
watts
ANSI Code
ElH
lamp
(lOO·watt,
120·volt,
quartz·halogen, elliptical reflector)
KODAK EKTANAR,
2y,·in.
f/3.5t
KODAK EKTANAR, 3·in.
f/3.5
KODAK EKTANAR, 4·in.
f/2.8
KODAK EKTANAR, 4·in.
f/3.5
KODAK
EKrANAR,
5·in.
f/2.8
KODAK
EKrANAR,
5·in.
f/3.5
KODAK
EKTANON,
7·in.
f/3.5
KODAK
EKrANAR
Zoom
Lens,
4- to 6-in.
f/3.5
tThe
KODAK
EKTANAR
Lens.
2'
h
-i
n. f / 3.5. is designed
to
provide sharp images
up
to
twelve inches wide
at
very
short
projection distances. as in
study
carrels.
3
To Next Page
Loading...
