No
Connection - Connect Later
You
can connect your
printer
at
a later time.
a.
Select
None
from
the
LCD display and press OK.
b.
Continue
with
step 7 if you have a
WINDOWS
OS
computer;
continue
with
step 8
if
you have a
MACINTOSH
computer
To
Change
the
Connection
Type
at
a Later Time:
From a USB connection
to
a
Wi-Fi
connection
type
To
change
the
connection
type
from
USB
to
Wireless
(Wi-Fi):
1.
On
the
LCD display, select Network Settings> Wireless
Setup
Wizard.
2.
Press OK. Follow
the
steps in
the
Wireless
(Wi-Fi)
Connection section.
3.
After
your
printer
is
connected
to
your
wireless network, go
to
Start>
Programs>
Kodak>
Kodak Printer
Network
Setup Utility. Follow
the
on-screen instructions.
4.
To
print
to
your
Wi-Fi
connected printer, choose Kodak
5250
-
XXXX
Printer
or
5260
-
XXXX
Printer
(where
XXXX
is
a
number
unique
to
your
printer).
From a
Wi-Fi
connection
type
to
a USB connection
type
To
change
the
connection
type
from
Wireless
(Wi-Fi)
to
USB:
1.
Connect
your
USB
cable
to
your
printer
and computer. The necessary drivers
will
install automatically.
2.
To
print
to
your
USB
connected printer, choose Kodak
5250
Printer
or
Kodak
5260
Printer.
10 www.kodak.com/go/aiosupport
To Next Page
Loading...
