www.kodak.com/go/aiosupport 24
KODAK ESP 5200 Series All-in-One Printer
Changing copy
photo options
To change the copy photo options:
1. Press
Home.
2. If necessary, press to select
Copy Photo.
3. Press
OK.
4. Press to view the options, and press or as needed to change the settings
below:
Copy Photo Option Settings Description
Quantity 1 (default) to 99 The number of copies that print.
Copy Size 2 x 3
3.5 x 5
4 x 6 (default)
4 x 7
5 x 7
4 x 12
8 x 10
8.5 x 11 or A4
If the selected copy size is smaller
than the paper in the paper tray, the
printer automatically arranges the
pictures to best fit the paper size.
Plain Paper Quality Normal
(default)
Good quality output; prints faster
than Best.
Best The highest quality.
Draft The fastest print speed.
Photo Paper Quality Automatic
(default)
The printer detects when you load
photo paper and sets Best quality
automatically.
Color Color
(default)
Prints full color.
Black & White Prints black and white (gray scale).
Brightness -3 to +3
(0 is default)
Lightens or darkens the copy.
0 (Normal) is no change from the
original; -3 is the darkest; +3 is the
lightest.
Save as Defaults No / Yes To save settings as the new default:
press OK, select Ye s , then press
OK.
To Next Page
Loading...
Need help?
General
