www.kodak.com/go/aiosupport 40
KODAK ESP 5200 Series All-in-One Printer
Monitoring and adjusting printer performance
From the control panel, you can perform many tasks to help you keep the printer
functioning well.
Checking ink
levels
To check the ink levels:
1. Press
Home.
2. Press to select Maintenance.
3. With
Check Ink Levels selected, press OK.
The LCD shows approximate levels of ink in the cartridges so you know when it’s
time to order replacement cartridges.
Resetting factory
defaults
To reset all defaults to the factory default settings:
1. Press
Home.
2. Press to select
Printer Settings.
3. Press to select
Reset All Settings, then press OK.
4. When you see the message, “This will reset printer settings to factory defaults,”
press
OK.
To Next Page
Loading...
