www.kodak.com/go/aiosupport 16
4
Printing Pictures
The quickest way to print pictures is from a memory card inserted into the printer.
Another way to print pictures is to use Home Center Software on your computer
running the WINDOWS Operating System. Home Center Software lets you edit and
enhance your pictures on your computer before printing. Open Home Center
Software, select
Print Pictures, then follow the on-screen instructions.
If you have a MACINTOSH Computer, print your pictures using KODAK
EASYSHARE Software, iPhoto, or another picture-editing program.
Changing Print Photos Options / Defaults
You can change the print photos options for an individual picture or group of
pictures, or you can change the settings and save them as the default.
To change print photos options:
1. Press
Home.
2. If necessary, press to select
View and Print Photos, then press OK.
3. Press or as needed to change the settings below.
Print Photos Option Settings Description
View Photos -- Scroll through the pictures on the
memory card.
Transfer All to PC -- To transfer all the pictures on the
memory card to your computer, press
OK then Start. (Your printer and
computer must be connected with a USB
cable.)
Quantity 1 (default) to 99 The number of copies that print.
Print Size 2 x 3
3.5 x 5
4 x 6 (default)
4 x 7
5 x 7
4 x 12
8 x 10
8.5 x 11 or A4
If the selected copy size is smaller than
the paper in the paper tray, the printer
automatically arranges the pictures to
best fit the paper size.
Plain Paper Quality Normal (default) Good quality output; prints faster than
Best.
Best The highest quality.
Draft The fastest print speed.
Photo Paper Quality Automatic
(default)
The printer detects when you load photo
paper and sets Best quality
automatically.
To Next Page
Loading...
Need help?
General
