Copying
23 www.kodak.com/go/aiosupport
4. Press to go through the options, and press or as needed to change the
settings below:
Copy Document Option Settings Description
Quantity 1 (default) to 99 The number of copies that print.
Copy Size Same Size
(default)
The copy is the same size as the
original.
Fit to Page The printer detects the size of the
original on the scanner glass and the
size of the paper in the paper tray, and
automatically reduces or enlarges the
original so that the copy fits on the
paper.
20% to 500% Reduces up to 20% or enlarges up to
500% of the original size.
Plain Paper Quality Normal
(default)
Good quality output; prints faster than
Best.
Best The highest quality, but the slowest
print speed; eliminates the banding
effect that sometimes occurs when
printing Draft or Normal.
Draft The fastest print speed, but the lowest
quality.
Photo Paper Quality Automatic
(default)
The printer detects when you load
photo paper and sets Best quality
automatically.
Color Color
(default)
Prints full color.
Black & White Prints black and white (gray scale).
Brightness -3 to +3
(0 is default)
Lightens or darkens the copy.
0 (Normal) is no change from the
original; -3 is the darkest; +3 is the
lightest.
Save as Defaults No / Yes To save settings as the new default:
press OK, select Ye s , then press OK.
To Next Page
Loading...
Need help?
General
