www.kodak.com/go/aiosupport 38
KODAK ESP 5200 Series All-in-One Printer
10. Push firmly against the target label of the printhead until you hear a loud snap.
11. Insert the black ink cartridge into the printhead.
12. Press down on the ink cartridge until you hear it click into position.
13. Repeat steps 11 - 12 for the color ink cartridge.
14. Close the printer access door.
The printer detects the new printhead. Follow the instructions on the LCD to
calibrate your printer.
10
Cartouche d'encre noire
10
To Next Page
Loading...
