Wireless
(Wi-Fi)
Connection
For
additional
Wi-Fi/Networking
setup
information, please go to:
www.kodak.comjg
i I kletnetworking
=-
- -
------'
----
---
I))))))
)
Determine
if
you are using a WPS
(Wi-Fi
Protected Software) enabled
router
or a non-WPS router. Follow
the
appropriate
steps below:
WPS
Enabled Routers
a.
Select WPS Connect
from
the
LCD
display.
b.
Select
Push
Button Configuration
(recommended
if
you have a WPS
router)
or
Generate
WPS
Pin.
Push Button Configuration
1.
Select
Push
Button Configuration on
the
LCD
display.
2.
Select
WPS
on
the
LCD
display.
3.
You
will
have
two
minutes
to
push
the
WPS
button
on
your
router
(this
may
either
be a physical
button
on the router,
or
a
virtual
button
in the router's
software).
Generate WPS
PIN
1.
Select Generate WPS
Pin
on
the
LCD display.
2.
Go
to
your
router's
software
and locate the
PI
N button.
(Refer
to
your router's
Web
page
for
more
information
about
WPS PIN.)
3.
Enter
the
PIN
you received on
the
LCD display
into
the
PIN
screen
for
your router.
c.
If successfully connected,
your
Wi-Fi
indicator
should be solid blue. Continue
with
step 7
if
you have
a
WINDOWS
OS
computer;
continue
with
step 8
if
you have a
MACINTOSH
computer.
If you are unable
to
connect
to
your
wireless network, go
to
vww
kodak
com/g('/i
kiptnptworking
or
refer
to
the User Guide at
'v
v vV.KoaaK.com/go/
01
u for
troubleshooting
information.
8 www.kodak.comjgojaiosupport
To Next Page
Loading...
