Kodak HERO 3.1 - Adjusting Document Copy Brightness

www.kodak.com/go/aiosupport 49
KODAK HERO 3.1 All-in-One Printer
Darkening or lightening a document
1. Lift the scanner lid, and place the document face down in the right-front corner
of the scanner glass.
2. Close the lid.
3. Press Home.
4. With Copy Document selected, press OK.
5. Press to select Brightness.
6. Press to select a number below zero for a darker copy, or press to select a
number above zero for a lighter copy.
7. Press Start to begin copying.