Kodak HERO 3.1 - Scanning to a Memory Card

www.kodak.com/go/aiosupport 61
KODAK HERO 3.1 All-in-One Printer
Scanning to a Memory Card
To scan to a memory card:
1. Lift the scanner lid, and place the document or picture face down on the glass,
then close the lid.
2. Press to select Scan, then press
OK.
3. Press to select Scan to Memory Card, then press
OK.
4. Press to select an option, then press or to change the setting.
Scan Option Settings Description
Scan What Photo
(default)
Sets the scan settings for scanning a picture
(see Changing the scan settings for scanning
from the printer control panel, page 57).
Document
Sets the scan settings for scanning a document
(see Changing the scan settings for scanning
from the printer control panel, page 57).
Scan Size Auto (default)
2 x 3
3.5 x 5
4 x 6
4 x 7
4 x 8
5 x 7
4 x 12
8 x 10
8.5 x 11
A4
8.5 x 14
Determines the size that is scanned.