Kodak HERO 3.1 - Adjusting Photo Copy Brightness

www.kodak.com/go/aiosupport 55
KODAK HERO 3.1 All-in-One Printer
Darkening or lightening a photo
To darken or lighten the copy:
1. Lift the scanner lid, and place the photo face down in the right-front corner of
the scanner glass.
2. Close the lid.
3. Press Home.
4. Press to select Copy Photo, then press OK.
5. Press to select Brightness.
6. Press to select a number below zero for a darker copy, or press to select a
number above zero for a lighter copy.
7. Press Start to begin copying.