www.kodak.com/go/aiosupport 67
KODAK HERO 3.1 All-in-One Printer
3. Wipe the glass with a soft cloth or sponge, slightly moistened with a
nonabrasive glass cleaner.
4. Dry the glass with a lint-free cloth.
5. Gently clean the document backing with a soft cloth or sponge, slightly
moistened with mild soap and warm water.
6. Dry the document backing with a chamois or lint-free cloth.
NOTE: If the document backing needs further cleaning, use isopropyl (rubbing)
alcohol on a soft cloth, then wipe thoroughly with a cloth moistened
with water to remove any residual alcohol.
7. When you finish cleaning, plug in the printer.
To Next Page
Loading...
