Kodak HERO 9.1 User Manual

Maintaining Your Printer
116 www.kodak.com/go/aiosupport
Replacing the printhead
IMPORTANT: Replacing the printhead is not a regular maintenance procedure. Replace
the printhead only if you receive a new printhead from Kodak.
1. Make sure the printer is on.
2. Lift the access door, and wait for the carriage to move to the access position.
3. Remove both ink cartridges and set them aside.

Kodak HERO 9.1 Specifications

General

Print Technology	Inkjet
Maximum Print Resolution	4800 x 1200 dpi
Scanner Type	Flatbed
Maximum Scan Resolution	1200 x 1200 dpi
Max Copying Resolution	600 x 600 dpi
Operating System Compatibility	Windows, Mac
Media Types	Plain Paper, Photo Paper, Envelopes
USB	Yes
Functions	Print, Copy, Scan
Connectivity	USB
Display	2.4-inch LCD
Paper Sizes	Letter, Legal
Paper Handling	100-sheet input tray
Ink Type	Dye-based