Kodak HERO 9.1 - Scanning to a Memory Card or USB Flash Drive

www.kodak.com/go/aiosupport 85
KODAK HERO 9.1 All-in-One Printer
Scanning to a memory card or USB flash drive
To scan to a memory card or USB flash drive:
1. Lift the scanner lid, and place the original face down in the right-front corner of
the scanner glass, then close the lid.
2. Close the lid.
3. Press .
4. Touch
Scan.
5. Touch
Memory Card or USB Flash Drive, then touch the setting/option you want
to change.
Scan Option Settings Description
Scan What Photo
(default)
Sets the scan settings for scanning a picture
(see Changing the scan settings for scanning
from the control panel, page 80).
Document
Sets the scan settings for scanning a document
(see Changing the scan settings for scanning
from the control panel, page 80).
File Type JPG (default) The scanned file is saved as a JPG.
Single-page PDF The scanned file is saved as a single-page PDF.
Multi-page PDF The scanned file is saved as a multiple-page
PDF.