EasyManua.ls Logo

Kodak HERO 9.1 - Using the Automatic Document Feeder (ADF)

Kodak HERO 9.1
145 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Handling Paper
50 www.kodak.com/go/aiosupport
Using the Automatic Document Feeder (ADF)
You can load up to 35 originals (20 to 24 lb / 75 to 90 gsm plain paper) in the
Automatic Document Feeder (ADF).
The ADF accepts originals in the following sizes:
IMPORTANT: Do not load photographs, cards, or any paper stock heavier than
24 lb / 90 gsm or lighter than 16 lb / 60 gsm in the ADF.
1. Remove any originals from the scanner glass.
2. Move the ADF paper-edge guides outward.
3. Fan and stack the originals, then insert them face up in the ADF.
IMPORTANT: Remove all paper clips and staples from the originals.
4. Move the ADF paper-edge guides until they touch the paper.
The ADF automatically feeds the originals into the printer when you begin copying,
scanning, or faxing.
Minimum size Maximum size
English units
6.9 x 9.8 in. 8.5 x 14 in.
Metric units 17.5 x 24.9 cm 21.6 x 35.6 cm
ADF paper-edge guides
ADF paper tray

Table of Contents

Related product manuals