Kodak HERO 9.1 - Page 17

www.kodak.com/go/aiosupport 11
KODAK HERO 9.1 All-in-One Printer
4. Touch your network name.
If you don’t see your network in the list, or you want to change your network,
touch
Rescan for Wireless Networks.
NOTE: If the name of your network is not listed, make sure your wireless router
is turned on and within range.
5. If your network requires a password, use the LCD keyboard to enter your
Security String. The Security String is case-sensitive. When you are finished,
touch
OK.
6. When the confirmation message appears, touch
OK.
When the printer is successfully connected, the Wi-Fi connectivity LED will stop
blinking and remain lit.
The printer with a wireless connection is listed as the name of the printer plus a
number (for example, KodakHERO9.1+0229)
7. If you haven’t installed the KODAK All-in-One Printer Software:
a. Go to www.kodak.com/go/aiodownloads.
b. In the results list, click the link for KODAK All-in-One Printer Software for
your computer’s operating system.
c. Follow the on-screen instructions.