To Next Page
S
Sean AndersonAug 16, 2025
Why is the LED on my Kodak i1220 Plus Scanner red?
- ZZachary WuAug 17, 2025
The LED on your Kodak scanner will remain a steady red until your application connects to the scanner.
Why is the LED on my Kodak i1220 Plus Scanner red?
The LED on your Kodak scanner will remain a steady red until your application connects to the scanner.
How to fix documents jamming in Kodak Scanner?
To resolve documents jamming or multiple documents feeding in your Kodak Scanner, ensure the following: * The side guides are adjusted to fit the width of your documents. * The output tray is set for the length of your documents. * All documents meet the size, weight, and type specifications. * The scanner and tires are clean. * The spring on the pre-separation module is properly adjusted. * The feed and pre-separation modules are correctly installed. To remove a jammed document: 1. Ensure the input tray is up before opening the cover. 2. Open the scanner cover. 3. Remove any jammed documents from inside the scanner. 4. Close the scanner cover and continue scanning.
What to do if my Kodak Scanner will not scan documents?
If your Kodak scanner won't scan or feed documents, check these items: * Ensure the power cord is securely plugged into the scanner and the wall outlet. * Verify the power supply's green LED is lit. * Confirm the power switch is on. * Test the wall outlet. * Confirm that the PC was restarted after installing the software. * Make sure the document(s) are making contact with the feed rollers. If feeding a stack of documents (more than 40) in the upright position, shingle the bottom documents or tilt the scanner downward.
Why does my Kodak Scanner produce red, green, or blue streaks on color photos?
If red, green, or blue streaks appear on color photos scanned with your Kodak scanner, the scanner needs cleaning.
What to do if no images are being displayed on Kodak i1220 Plus Scanner?
If you're not seeing any images displayed when using your Kodak i1210 Plus or i1310 Plus Scanner, ensure that the side you want to scan is facing the input tray.
How to remove roller marks on documents scanned with Kodak i1220 Plus?
To address roller marks appearing on documents after scanning with your Kodak scanner, clean the rollers.
Why is my Kodak i1220 Plus Scanner running slow?
If your Kodak scanner is running slowly, it could be due to your PC not meeting the minimum requirements or using a USB 1.1 connection. Update to USB 2.0 if applicable.
How to fix black background bleed-through on Kodak i1220 Plus Scanner images?
If you see black bleed-through on images when scanning translucent documents with your Kodak scanner, adjust the Contrast value or select Draft (Fixed) in TWAIN or Fixed Processing in ISIS to improve the image or use the Kodak White Background Accessory.
Kodak i1220 Plus Scanner: How to scan after Standby or Hibernate with Microsoft Windows Vista?
If you cannot scan after Standby or Hibernate using Microsoft Windows Vista with your Kodak scanner, upgrade to Service Pack 1 or higher.
How to fix page number communication issues with Kodak i1220 Plus Scanner and SANE driver?
To address the issue where the number of pages value isn't communicated to the SANE driver on your Kodak scanner, set the Number of Pages value to a number larger than the images you'll capture in a batch.
General| Film scanning | No |
|---|---|
| Color scanning | Yes |
| Grayscale levels | 8 |
| Input color depth | 48 bit |
| Maximum scan size | 215 x 863 mm |
| Scanner type | Flatbed & ADF scanner |
| Scan media weight | 34 - 413 g/m² |
| Dimensions (WxDxH) | 330 x 162 x 246 mm |
| Image formats supported | BMP, JPG, TIF |
| Media thickness (imperial) | 0.05 \ |
| Sensor type | CCD |
| Maximum duty cycle | 90000 pages per month |
| ISO A-series sizes (A0...A9) | A3, A4 |
| Maximum ISO A-series paper size | A3 |
| Auto document feeder (ADF) input capacity | 75 sheets |
| USB version | 2.0 |
| Standard interfaces | USB 2.0 |
| Minimum RAM | 2048 MB |
| Minimum processor | Intel Core2, 2 GHz Duo |
| Compatible operating systems | Windows XP SP2/SP3 (32-bit), Windows XP x64 edition SP2, Windows Vista SP1 (32-bit / 64-bit), Windows 7 (32-bit / 64-bit), Windows 2003 Server/2008 Server/x64, Linux Ubuntu 8.04, Fedora 9, SUSE 11 |
| Sustainability certificates | ENERGY STAR |
| Power consumption (typical) | 35 W |
| Operating temperature (T-T) | 10 - 35 °C |
| Operating relative humidity (H-H) | 17 - 76 % |
| Bundled software | TWAIN, ISIS, WIA Drivers; KODAK Capture Desktop Software, Smart Touch; Nuance ScanSoft PaperPort, OmniPage. |
Weight and Dimensions| Depth | 162 mm |
|---|---|
| Width | 330 mm |
| Height | 246 mm |
| Weight | 5500 g |
