8 A-61655 November 2009
Scan Options The following Scan Options are available:
Edit images prior to sending — if selected, the scanned images will
be displayed in an Edit window to allow for editing. See the section
entitled, “Smart Touch Edit window”.
Wait for more pages when feeder empty — if selected, the scanner
will pause when the feeder is empty and prompt you to add more
sheets to the document feeder for scanning.
Add keyword to document file — allows you to add a word to the
document file properties to aid in searching for a file at a later time.
NOTE: Keywords cannot be saved with bitmap files.
Separate after blank sheet — if selected, allows you to put multiple
documents in the feeder with blank sheets between documents. Smart
Touch then creates separate document files for the set of scanned
images after each blank sheet.
Setting — displays the Blank Image Size dialog box. This option allows
you to select the maximum image size that the scanner will consider to
be blank. Any image that is larger than this value will be considered
non-blank and saved as part of the document file.
You can adjust the threshold value for determining blank pages from
Low to High.
NOTE: For Smart Touch to determine blank pages, the following
selections should be made:
• File Type should not be .bmp.
•In the Scan as: Scanner window settings:
Blank Image Detection = none
Compression type = JPEG
Compression Quality = Draft, Good or Better
To Next Page
Loading...
