12 A-61655 November 2009
11. If desired, select a different scanner Settings Shortcut based on the
type of document you are scanning, by selecting the Scan As:
Settings button. When you click Settings, the TWAIN Datasource
is launched and the main Kodak Scanner window is displayed.
NOTE: Detailed information about the TWAIN Datasource can be
found in the Image Processing Guide located on the
installation CD.
12.If you want to change your scanner Settings Shortcut before
scanning, check Display settings prior to scanning from the
Smart Touch Configuration window.
13.Click Apply.
14.Modify other function numbers by repeating Steps 3 - 12.
15.When finished, click OK.
To Next Page
Loading...
