Kodak Pixpro 4KVR360 - Page 47

46
1.
C
amera:
Check SSID (Service Set Identiier) (PIXPR
O4KVR360_KXXX) and
passw
ord (initial password: 12345678
) indicated on the label in the battery
compar
tment of the camera. With the camera turned on, pr
ess the
button f
or 2 seconds to enter the pairing mode
：
Connect camera to smart device (or PC) with Wi-Fi.
Operation method:
2. Smart Device or PC:
Enable Wi-Fi mode, it will automatically search the nearby Wi-F
i hotspots.
Select the one with the same S
SID (PIXPRO4KVR36
0_KXXX) and input the
passw
ord.
PIXPRO-4KVR360_KXXX
3. Camera:
When the Wi-Fi connection is successful, enter the Wi-F
i connection
inter
face.
4. Smart Device or PC:
When connected via Wi-Fi, you can t
ap the App icon
on the smart
device to start it; or double-click the App icon
on the desktop of the
computer to start it.
5.
C
amera:
When the App is connected to the camera, the App connected interf
ace will
appe
ar.
When recording is started via the App, the recording interface will appear on
the camera.