Kodak PIXPRO Astro Zoom AZ401 User Manual

34 35
Custom Settings
The user can store frequently used
shooting modes and parameters, and
switch to this mode for a quick adjustment.
Changing these settings will override any
previous settings in CS mode.
Settings under mode:
1. Turn the Mode dial to select the mode
and enter the setup screen as shown in
the igure below:
Select one capture mode to define CS .
Landscape
Save
Exit
2. As shown in the igure above, press the
left/right arrow buttons to select the
capture mode that you want to deine as
and press the button to enter the
shooting screen.
3. As shown in the igure above, press
the button and choose whether to
continue the mode setting or rotate
the Mode dial to skip.
Or
Go to setting CS mode
Rotating the mode dial to skip .
Yes
For setting under other modes (use this
method to select a different custom
setting):
1. Select any mode to be stored.
2. Set your desired parameters in the
current mode.
3. Press the button, press the up/down
arrow buttons to select , and press
the button to enter the menu.

Kodak PIXPRO Astro Zoom AZ401 Specifications

General

Sensor Type	CCD
Sensor Size	1/2.3 inch
Effective Pixels	16.15 MP
Optical Zoom	40x
Image Stabilization	Optical
LCD Screen Size	3.0 inch
LCD Resolution	460, 000 dots
Image Resolution	4608 x 3456
Digital Zoom	4x
Storage Media	SD/SDHC Card
Type	Bridge Camera
Focal Length	4.3-172 mm
Aperture Range	f/3.0-6.8
ISO Sensitivity	ISO 80-3200
Shutter Speed	1/2000 - 8 sec
Video Resolution	1280 x 720 (HD)
Battery Type	4 x AA Batteries