Kodak PIXPRO Astro Zoom AZ401

86 87
Connecting to a PICTBRIDGE™ Compatible Printer
PICTBRIDGE™ technology allows printing
of photos saved on the memory card by a
PICTBRIDGE™ compatible printer.
To ind out if a printer is PICTBRIDGE™
compatible, simply look for the
PICTBRIDGE™ logo on the packaging
or check the owner's manual for
speciications. With the PICTBRIDGE™
function on your camera, you can print
captured photos directly to a PICTBRIDGE™
compatible printer using the micro USB
cable, without the need for a PC.
Setting the USB Mode
The camera’s USB port can be set to
connect with either a PC or a Printer,
the following steps will ensure that the
camera is correctly conigured to connect
with a printer.
1. Press the button, press the up/down
arrow buttons to select and press
the button to enter the menu.
2. Press the up/down arrow buttons to
select and press the button or
right arrow button to enter the menu.
3. Press the up/down arrow buttons to
select [USB] and press the button
or right arrow button to enter the
menu.
4. Press the up/down arrow buttons to
select [Printer] and press the button
to conirm.
After the camera is reset, it will
switch to PC Mode automatically
from USB Mode.
See “Using the PICTBRIDGE™ Menu“
section on page 89.