Kodak PIXPRO Astro Zoom AZ401

81
Firmware (FW) Version
Use this setting to view the current
irmware version installed on your camera.
1. Press the button, press the up/down
arrow buttons to select and press
the button to enter the menu.
2. Press the up/down arrow buttons to
select and press the button or
right arrow button to enter the menu.
3. Press the up/down arrow buttons to
select [FW Version] and press the
button or right arrow button to enter
the menu.
4. When there is a new irmware version
on a memory card, select [Yes] to
update.
Reset
Use this setting to restore the camera to
its original default settings.
1. Press the button, press the up/down
arrow buttons to select and press
the button to enter the menu.
2. Press the up/down arrow buttons to
select and press the button or
right arrow button to enter the menu.
3. Press the up/down arrow buttons to
select [Reset] and press the button
or right arrow button to enter the
menu.
4. Press the up/down arrow buttons to
select [Yes] or [No] and press the
button to conirm.