4-2 A-61676 June 2010
Roller cleaning pads Review the following information before using the roller cleaning pads.
• If you need more information about the roller cleaning pads, refer to
the Material Safety Data Sheet (MSDS). See the Kodak website at:
www.kodak.com/go/msds.
• Additional roller cleaning pads can be purchased. See “Supplies and
consumables” later in this chapter for ordering information.
NOTE: Use the roller cleaning pads immediately after opening the bag.
Cleaning the outside of the
scanner
Clean the outside of the scanner at least once a month.
1. Turn the scanner off.
2. Clean the exit tray, the feeder and feeder tray, cover and other
surfaces with a soft cloth.
3. Use a brush to remove dirt and dust from the side vent.
To Next Page
Loading...
