A-61676 June 2010 1-3
Scanner components
Front view
Paper feed roller — feeds a single document at a time into the
scanner.
Feeder tray — holds documents in place for automatic or manual
scanning. The documents should be placed face-up to ensure they are
scanned in the correct order.
Exit tray extension — pull this extension out to accommodate
document sizes longer than 11 inches (279.4 mm).
Exit stopper — located on the exit tray, the exit stopper can be
positioned to accommodate the length of the documents being fed
through the scanner.
Exit tray — collects the documents after scanning. The scanned
documents will be deposited face-down in the exit tray.
Power switch — press this button to turn the scanner on or off.
Business card guides — allows you to scan smaller documents, such
as business cards. When scanning, lift up the business card guides and
stopper.
LED — lights when the power to the scanner is on.
Stop/Start button — starts or stops scanning.
Document guides — slide the document guides in or out to
accommodate the size of the documents you are scanning.
ADF door release — push this button to open the ADF door.
ADF door — provides access to the Automatic Document Feeder.
Printer access door — provides access to the optional imprinter for
installation and maintenance
Stop/Start
ADF door
release
ADF door
Document guide
Feeder tray
extension
Power
switch
Exit tray
Exit stopper
LED
Business card
guides
Exit tray
Paper feed
roller
Printer access door
button
To Next Page
Loading...
