Kohler 20RCA

56 TP-7092 11/22
3.17 Date and Time Menu
The date and time will typically be set at controller powerup. To change the date, time, or time format (12 hour or 24 hour), use
the Date and Time menu. See Figure 45.
Figure 45 Date and Time Menu
3.18 Networking Information Menus
Use the networking menus to view and adjust communication settings for systems with remote RBUS devices such as a PIM or
load shed kit, and for systems that use the Kohler
®
OnCue
®
Plus Generator Management System.
RBUS is a proprietary RS-485 communications protocol.
The Networking Information menu leads to submenus for network and RBUS communication settings. See Figure 46.
Figure 46 Networking Information Menu
Date and Time
To change the date and time, press the Select button. See the Changing Settings section for instructions.
Date:
02Dec2011
Time:
12:34pm
Time Format:
12hr
<--- Return
Networking --->
Information
See the Network Status Submenu
section
Networking --->
Status
Networking --->
Configuration
RBUS --->
Information
<--- Return
RB
NC
NS
See the Network Configuration
Submenu
section
See the RBUS Information section
TP-6810