16 TP-7203 4/23
Tools Required:
• Multimeter (for measuring voltage and current)
• Frequency meter (may be part of multimeter)
• Manometer (for measuring fuel pressure)
• Torque wrench
• Wrenches
• Screwdrivers
• Socket wrenches or nut drivers
• Pliers
• Safety glasses or goggles
• Drill with bits and hole saw
Installer/Customer-Supplied Items:
• One BCI group 24 size 12-volt battery with a minimum rating of 630 cold cranking amps (CCA) at 0˚F
• Gravel or crushed stone
• Concrete mounting pad
• 120 VAC receptacle
• Cables and conduit
• Fuel supply line with shutoff valve and pipe sealant (provided by fuel supplier)
• Carbon monoxide (CO) detector(s)
Available Accessories:
• Battery
• Battery heater
• Block heater
• Flexible fuel lines
• Programmable Interface Module (PIM) See TT-1584 for installation instructions
• Load management system
To Next Page
Loading...
