Kohler COURAGE SV710-740 - Carburetor Adjustment and Troubleshooting; Adjusting Carburetor Settings


6HFWLRQ
6DIHW\DQG*HQHUDO,QIRUPDWLRQ
*HQHUDO6SHFL¿FDWLRQV

Power (@ 3600 RPM, Horsepower ratings exceed Society of Automotive Engineers Small Engine Test Code J1940.)
SV710, SV810 ........................................................................................................14.9 kW (20 HP)
SV715 .....................................................................................................................16.4 kW (22 HP)
SV720, SV820 ........................................................................................................17.2 kW (23 HP)
SV725 .....................................................................................................................17.9 kW (24 HP)
SV730, SV830 ........................................................................................................18.6 kW (25 HP)
SV735 ....................................................................................................................19.4 kW (26 HP)
SV740, SV840 ........................................................................................................20.1 kW (27 HP)
Bore ............................................................................................................................83 mm (3.27 in.)
Stroke ..........................................................................................................................67 mm (2.64 in.)
Displacement ............................................................................................................725 cc (44 cu. in.)
Compression Ratio ...................................................................................................9.0:1
Dry Weight ................................................................................................................41.2 kg (91 lb.)
Oil Capacity (w/filter) - approximate,
determined by oil filter and if oil cooler equipped ..............................................1.6-1.8 L (1.7-1.9 qt)
Angle of Operation - Maximum (At Full Oil Level) All Directions ...................25°
%ORZHU+RXVLQJDQG6KHHW0HWDO
M4 HI-LO Screws Torque ........................................................................................2.8 N·m (25 in. lb.)
M5 Fasteners Torque .................................................................................................4.0 N·m (35 in. lb.)
M6 Fasteners Torque .................................................................................................6.8 N·m (60 in. lb.)
Rectifier-Regulator Fastener Torque .......................................................................4.0 N·m (35 in. lb.)
&DPVKDIW
End Play (With Shim) ...............................................................................................0.076/0.127 mm (0.0030/0.0050 in.)
Running Clearance ....................................................................................................0.025/0.063 mm (0.0010/0.0025 in.)
Bore I.D.
New ........................................................................................................................20.000/20.025 mm (0.7874/0.7884 in.)
Max. Wear Limit ..................................................................................................20.038 mm (0.7889 in.)
Camsha Bearing Surface O.D.
New ........................................................................................................................19.962/19.975 mm (0.7859/0.7864 in.)
Max. Wear Limit ..................................................................................................19.959 mm (0.7858 in.)
&DUEXUHWRUDQG,QWDNH0DQLIROG
Intake Manifold Mounting Fastener Torque
Torque in Two Stages ..........................................................................................first to 7.4 N·m (66 in. lb.)
finally to 9.9 N·m (88 in. lb.)
Carburetor Mounting Nut Torque ..........................................................................6.2-7.3 N·m (55-65 in. lb.)
¹Values are in Metric units. Values in parentheses are English equivalents. Lubricate threads with engine oil
prior to assembly.