EasyManua.ls Logo

Kohler ECV940 - Maintenance Instructions; Maintenance Schedule

Kohler ECV940
172 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance
362 690 05 Rev. H KohlerEngines.com
MAINTENANCE INSTRUCTIONS
WARNING
Before working on engine or equipment, disable engine as
follows: 1) Disconnect spark plug lead(s). 2) Disconnect
negative (–) battery cable from battery.
Accidental Starts can cause severe injury or
death.
Disconnect and ground spark plug lead(s)
before servicing.
Normal maintenance, replacement or repair of emission control devices and systems may be performed by any repair
establishment or individual; however, warranty repairs must be performed by a Kohler authorized dealer.
MAINTENANCE SCHEDULE
Every 100 Hours or Annually¹
Change oil. Oil lter is recommended. Lubrication System
Remove cooling shrouds and clean cooling areas. Inspect for any debris visible
through ywheel cooling holes (if equipped) and clean as necessary.
Air Cleaner/Intake
Every 150 Hours¹
Check air cleaner element. Air Cleaner/Intake
Replace unique Electronic Fuel Injection (EFI) fuel lter.
Check oil cooler ns, clean as necessary. Lubrication System
Every 200 Hours
Change oil lter. Lubrication System
Every 300 Hours
Replace air cleaner element and check inner element. Air Cleaner/Intake
Every 300 Hours
2
Change oil and lter (KOHLER PRO 10W-50 oil and KOHLER PRO lter only). Lubrication System
Every 500 Hours or Annually¹
Replace spark plugs and set gap. Electrical System
Every 600 Hours
Replace air cleaner inner element. Air Cleaner/Intake
1
Perform these procedures more frequently under severe, dusty, dirty conditions.
2
Option only if using KOHLER
®
PRO oil and PRO lter.
REPAIRS/SERVICE PARTS
Kohler genuine service parts can be purchased from Kohler authorized dealers. To nd a local Kohler authorized
dealer visit KohlerEngines.com or call 1-800-544-2444 (U.S. and Canada).

Related product manuals