VIEW
VIEW
Adjustment (Lock Off): The lock off adjustment is provided only to shut off fuel when engine is
not operating
--
it is not for adjusting fuel mixture
or
engine speed. Readjustment should
be
necessary only after regulator has been completely disassembled or if fuel is not being shut off
properly after engine stops. Use following procedure to adjust:
With engine stopped, slowly turn lock off screw out (counterclockwise direction)
until fuel starts to flow through the regulator then turn screw in (clockwise) until the
flow stops
--
note position of screw when flow stops then turn in one more turn for
final
settinc.