Service and Repair Manual Repair
Exhaust aftertreatment system
Information
It is forbidden to handle the connector locking device on the pump side.
Only use the lock on the harness side to connect the 10-pin connector 6.
u Run the system for 30 min to confirm successful priming and leak-free operation.
Specific values
Not applicable.
Tightening specifications
Refer to standard tightening torques. (For more information see: 5.3 Standard tightening torques,
page 264.)
KD62V12 33525088601_7_1 EN_US
2021-07
© 2021 by Kohler Co. All rights reserved.
255
To Next Page
Loading...
