Service and Repair Manual Appendix
Cleaning agents, thread-locking adhesives and greases
5.2 Cleaning agents, thread-locking adhesives and
greases
This list includes all thread-locking adhesives and greases required for repair and maintenance
tasks on the engine.
The application is described in the respective job specifications.
Information
Should a thread-locking adhesive be required, first clean, degrease and dry the respective screw
thread and threaded bore.
5.2.1 Cleaning agents and thread-locking adhesives
Designation Designation Amount
(g / fl-oz)
Supplier
Omniclean or Loctite 7063 500 / 16.9 Loctite
Loctite 243 250 / 8.4 Loctite
Loctite 270 or Omnifit 200 M 250 / 8.4 Loctite
Loctite 577 250 / 8.4 Loctite
Loctite 648 or Omnifit 230 M 250 / 8.4 Loctite
Loctite 5900 50 / 1.7 Loctite
Loctite 5910 300 / 10.1 Loctite
Tab. 58: Cleaning agents and thread-locking adhesives
Designation Designation Amount
(g / fl-oz)
Supplier
Omnivisc 1050 or Loctite 601, Reinzo-
plast, Hylomar SQ32 /
M
90 / 3.0 Loctite
Loctite 480 500 / 16.9 Loctite
Tab. 59: Cleaning agents and thread-locking adhesives
5.2.2 Greases
Designation Amount (g / fl-oz) Supplier
Molykote Longterm 2 Plus 1000 / 33.8 Molykote
Staburags NBU 30 1200 / 40.6 Kübler
Copper Paste; Motorex 14 850 / 28.7 Motorex
Optimol White T 100 / 3.4 Castrol
Tab. 60: Greases
KD83V16 33525088901_2_1 EN_US
2021-07
© 2021 by Kohler Co. All rights reserved.
273
To Next Page
Loading...
Need help?
General
