TP-6928 1/14 19Section 2 OnCue Plus Operation
Section 2 OnCue Plus Operation
2.1 Introduction
Kohlerr OnCuer Plus monitors the generator set and
generates messages continually. After the application
has been configured to send email and/or text
messages, the OnCue Plus server will continue to send
messages when the PC is turned off or disconnected
from the Internet.
The generator set controller must be in AUTO mode to
communicate with OnCue Plus.
Note: Sample screens are shown in this document.
The actual screens may vary.
2.2 Information Required
You will need to enter some information when you create
your OnCue Plus account and connect to your
generator set. Create a user name, account password,
and display name for your generator set, and provide
the generator location. Obtain other information from
the generator set and the OnCue Plus kit. Required
information is listed in Figure 2-1.
Item Description Can Change in Settings View?
User name Create your user name when setting up your account. NO
Password Create your password when setting up your account. NO
Serial Number For adding new generator, get from genset controller
nameplate or controller. See Section 1.9.
NO
Genset Password For adding new generator, get from genset controller.
See Section 1.9.
YES
OnCue Plus Activation Code From OnCue decal, provided with OnCue Plus kit. See
Section 2.6.
NO
Genset Displayname Create a name that identifies the generator set. YES
Genset Location Enter address or other location information for the
generator set.
YES
Figure 2-1 Required Information
To Next Page
Loading...
Need help?
General
