TP-6928 1/14 35Section 2 OnCue Plus Operation
2.14.5 Generator Data Updates
Generator data is updated in OnCuer Plus as soon as
possible. In some cases, you may want to change the
data updates to send data less often. For example:
D If you have a data plan that charges by the amount of
data or limits the amount of data received, you may
want to update less often.
D When the utility power is out and your generator set is
supplying your home, you may want to select updates
every 5 minutes until the utility power returns and the
generator set shuts down.
D Selecting “ On view change” will update the data only
when you change your view in OnCue Plus.
Figure 2-22 Generator Data Updates
2.14.6 Generator Settings
The Generator Settings view allows you to change the
name and password for the generator.
Change Generator Display Name
When a generator is connected for the first time, the
generator name displayed in OnCuer Plus will be the
generator serial number. Use the Genset Name setting
to change the name to something that identifies the
generator. For example, you can rename the unit using
your name or a location. If your dealer or distributor will
be monitoring the generator, use a name that
distinguishes your unit from other customers’
equipment.
Names must contain at least four characters, and can
use letters and numbers.
Change Generator Password
Change the generator password from the 4-digit
controller password to a password of your choice. If the
password is changed, other users will lose the OnCue
Plus connection to that generator. If your dealer is
monitoring your generator, be sure to give him/her the
new password.
Generator Location
Click on Genset Location and type in the location of the
generator set.
Generator Dealer
Enter your dealer ’s information, including their email
address. This allows you to email your dealer using the
Dealer view described earlier.
To Next Page
Loading...
Need help?
General
