Koldfront PACI12020CSV - Installation Location and Adapter; Installing the Grated Adapter

4
INSTALLATION LOCATION
If you have multiple windows, choose one that is near an electrical outlet that will be able to provide
sufficient power to your unit. See the power requirements listed on the product label printed on the side, or
on the back of your portable air conditioner.
Your window kit can be installed on a horizontal or vertical sliding window as shown in the following
pictures:
INSTALLING THE GRATED ADAPTER
1. Insert the round grated adapters through the back grooved side of the window kit plate with holes.
Note: Exhaust Covers may be attached to the Grated Adapters. You may need to twist and pull apart to
separate them.
Note: You may need to contact your electrician if your room’s circuit is not able to power your unit.