Koldfront WAC6002WCO - Control Panel Operations; Using the Control Panel

9
Control Panel Operations
Using the Control Panel
To Turn the Unit On:
Press the Power button.
To Change Temperature:
Press or hold either Up or Down button until desired temperature is seen on the digital
display. This temperature will be automatically maintained anywhere between 61°F (16°C) and
86°F (30°C).
To Adjust Fan Speeds:
To select the speed of the fan, press the Fan Speed button which cycles through four (4) steps:
Auto, Low, Medium, and High. Each time the button is pressed the fan speed mode is shifted to
the next speed option.
Note: The Energy Saver feature will automatically turn on in “Cool,” “Dry,” and “Auto” modes.
Note: While in “Dry” mode, the fan speed is automatically set to Low and cannot be adjusted.