WARNING: To reduce the risk of injury, before using or servicing screwdriver,
read and understand the following information as well as separately provided
safety instructions (item code: 0MS000). The features and descriptions of our
products are subject to change without prior notice.
DECLARATION OF USE
Screwdriver (class I) suitable for industrial environment only. It shall be used for
tightening. No other use will be permitted. For professional use only.
DATA
Noise level: < 70 dB(A)
Vibration level: < 2.5 m/s²
Declaration of noise and vibration emission
These declared values were obtained by laboratory type testing in compliance with
the stated standards and are not adequate for use in risk assessments. Values
measured in individual work places may be higher than the declared values. The
actual exposure values and risk of harm experienced by an individual user are
unique and depend upon the way the user works, the work piece and the
workstation design, as well as upon the exposure time and the physical condition of
the user. We, KOLVER, cannot be held liable for the consequences of using the
declared values, instead of values reflecting the actual exposure, in an individual
risk assessment in a work place situation over which we have no control.
OPERATING MODE
The screwdriver can be manual or used as fixed spindle on an automatic machine.
IMPORTANT: Continuous use over 80% of torque range is not recommend!
To Next Page
Loading...
