.
This Komatsu machine is designed to be used mainly for the following work:
Dozing
Cutting into hard or frozen ground or ditching
Felling trees, removing stumps
Pushing
Ripping
For further details, see "WORK POSSIBLE USING BULLDOZER (PAGE 3-111)" and "RIPPER OPERATION
(PAGE 3-118)".
FRONT/REAR, LEFT/RIGHT DIRECTIONS OF MACHINE
In this manual, the terms front, rear, left, and right refer to the travel direction as seen from the operator's cab when
the operator's cab is facing the front and the sprocket is at the rear of the machine.
To Next Page
Loading...
