Komatsu D475A-3 - Safety Lock Lever

.
OPERATION
EXPLANATION OF COMPONENTS
SAFETY LOCK LEVER
WARNING
When
standing
up
from
the
operator's
seat,
always
set
the
safety
lever
securely
to
the
LOCK
position.
If
the
blade
control
and
ripper
control
levers
are
not
locked
and
are
touched
by
accident,
it
may
lead
to
serious
injury
or
damage.
If
the
safety
lever
is
not
set
securely
to
the
LOCK
position,
the
lock
may
not
be
applied.
Check
that
it
is
in
the
position
shown
in
the
diagram.
When
parking
the
machine
or
when
carrying
out
maintenance,
always
lower
the
blade
and
ripper
to
the
ground,
then
set
the
safety
lever
to
the
LOCK
position.
This safety lever (6) is a device to lock the blade control and ripper control levers.
When it is set to the LOCK position, the TILT, RAISE, LOWER, and FLOAT operations are locked.
REMARK
When starting the engine, to ensure safety, always set the safety lever to the LOCK position.
3 - 42