Komatsu D475A-3 - Blade Control Lever

.
OPERATION
EXPLANATION OF COMPONENTS
BLADE CONTROL LEVER
This lever (7) is used to raise the blade.
Single tiltdozer
This lever is used to raise or tilt the blade.
Lifting control
(a) RAISE:
(b) HOLD:
Blade is stopped and held in this position.
(c) LOWER:
(d) FLOAT:
Blade will move freely according to external force.
REMARK
When released form FLOAT position, this lever will not return to
HOLD position, so it must be moved back by hand.
Tilting control
(A) RIGHT TILT
(B) LEFT TILT
DUAL TILTDOZER
Operate the tilt switch to the (D) position.
3 - 43