Kone V3F18 - F18; General; Validity of the Instruction

V3F25/18 drive
Installation Instruction
© 2004 KONE Corporation AM-11.65.020
All rights reserved. 2 (42) (E) 2004-01-08
1 GENERAL
1.1 Validity of the instruction
This instruction is valid for commissioning and testing the operation of the drive modules
V
3
F18 and V
3
F25 (HCB board 781380G01) in following elevator configurations.
This instruction replaces AM-11.65.015 V
3
F25 commissioning instruction.
For commissioning of Alta Elevators with V
3
F25 drive, refer to AM-11.65.021.
Elevator/revision Drive/revision Control system Elevator level manual
MonoSpace®
1.6 m/s
V
3
F18/ 760100 LCE/No Cabinet AM-01.01.026 (D)
MonoSpace®
Special
V
3
F18/ 760100 LCE/No Cabinet AM-01.01.049
MiniSpace™ V
3
F25/ 782999 LCE AM-01.01.043 and
AM-01.01.043-EXT and
AM-01.01.031
TranSys™ V
3
F18/ 760100 LCE/No Cabinet AM-01.01.073
EcoSystem MR®
(in North America)
V
3
F25/782999 LCE AM-01.01.055 and
AM-01.01.065
MonoSpace®
(in North America)
V
3
F25/782999 LCE AM-01.01.056 and
AM-01.01.065