Konftel 300IPx - During a Call; Adjusting Speaker Volume; Placing Calls on Hold; Ending Calls

10
ADJUSTING THE SPEAKER VOLUME

Adjust the speaker volume using the buttons and .
PLACING CALLS ON TEMPORARY HOLD
Mute

Press to turn the microphone o.
The LEDs change from blue to red. The other party cannot hear what you are saying.

Press to reconnect the call.
Hold

Press to place the call on hold.
The LEDs change from blue to flashing red. Both the microphone and the speaker are turned o
and the call is on hold.

Press to reconnect the call.
ENDING CALLS

End the call by pressing .
SECURE CONNECTION
The Konftel 300IPx supports secure data connections between devices (authentication
and encryption). This feature must be activated by the administrator.
You know the feature is activated if you see a closed padlock in the lower right-hand cor-
ner of the display screen when the Konftel 300IPx has a secure connection to the other
phone. If the phone or PBX you are calling does not support secure connections, you will
see an open padlock on the screen. See the illustration on page 5.
DURING A CALL