Konftel 300IPx - System Management; Restarting Phone Programme; Restarting the Phone; Restore Factory Settings

31
SETTINGS

AUTO is the default setting and is recommended in most cases. The figure shown in
brackets is the measured calibration value.

Select dierent levels and compare the audio quality to achieve your preferred
setting.

NB. You must ask the person you are calling to assess the eect of the adjustments you
make.
SYSTEM
The system menu can be used for manual restarts and resets.
Restarting the phone programme
This restarts the telephone application, which takes less than 30 seconds.

Select > SYSTEM > RESTART APPL. (7,1).

Confirm that you really want to restart by pressing OK again, or cancel the restart by
pressing
.
Restarting the phone
This restarts the phone, which takes about two minutes.

Select > SYSTEM > RESTART TEL. (7,2).

Confirm that you really want to restart by pressing OK again, or cancel the restart by
pressing
.
Restore to factory settings
This option fully restores the Konftel 300IPx to factory settings. All settings are deleted,
including PIN codes and registered accounts. Alternatively, a PIN code is required for
Admin.

Select > SYSTEM > TOTAL RESET (7,3).

Enter the PIN code for Admin and press OK.

Confirm that you really want to restart by pressing OK again, or cancel the restart by
pressing
.