Issue 1.0 04/01/00
CONTENTS
1 INTRODUCTION
1.1 Electronics PCBs
1.2 Mechanical Components
2 OPERATION
3 ASSEMBLY INSTRUCTIONS
3.1 Rotary Drive
3.2 Control Unit
3.3 Junction Box
3.4 Heading Sender
3.5 Remote Control
4 MECHANICAL ASSEMBLY DRAWINGS
4.1 General Assembly : Rotary Drive SRD12
4.2 General Assembly : Control Unit SFC12
4.3 General Assembly : Junction Box SJB12
4.4 General Assembly : Heading Sender SHS12
4.5 General Assembly : Remote Control E03709
5 CIRCUIT DESCRIPTIONS
5.1 SRD12 PCB Assy : Drive Assembly
5.2 SFC12 PCB Assy : Control Unit
5.3 SHS12 PCB Assy : Heading Sender
5.4 SHC14 PCB Assy : Hand Control
6 CIRCUIT DIAGRAMS
6.1 Circuit Schematics
6.2 Component Lists and Layouts
7 PROGRAMMING AND CONFIGURATION
7.1 Master Reset Procedure
8 FAULT FINDING
8.1 Common User Faults
8.2 Common Technical Faults
9 SPARE PARTS PACKS
10 TECHNICAL NOTES
Simrad Navico Ltd
Star Lane, Margate, Kent CT9 4NP, UK
Telephone +44 (0) 1843 290290
Facsimile +44 (0) 1843 290471
E-Mail : sales@simrad-navico.co.uk
© 2000 Simrad Navico Ltd
The technical data, information and illustrations contained in this publication were to the best of our knowledge correct at the time of going to print. We reserve the right to
change specifications, equipment, installation and maintenance instructions without notice as part of our policy of continuous development and improvement.
No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form, electronic or otherwise without prior permission from Simrad Navico Ltd.
No liability can be accepted for any inaccuracies or omissions in the publication, although every care has been taken to make it as complete and accurate as possible.
To Next Page
Loading...
