Loading Originals
4
4-7
How to position a sheet original
Use the following procedure to position plain paper or an original
that is not suitable for use in the Automatic Document Feeder.
1
Raise the Automatic Document Feeder or Original Cover.
2
Place the original face down on the
Original Glass.
3
Position the original in the left rear
corner aligned with the marker on
the scale.
4
Gently lower the Automatic Document Feeder or Original Cover.
5
Make the necessary settings.
❍
Making Copies (p.5-1)
❍
Advanced Copying (p.6-1)
6
Press the [START] key to start the copy cycle.
Konica7115_7118.book Page 7 Tuesday, October 16, 2001 10:51 AM
To Next Page
Loading...
