6
Advanced Copying
6-4
?
Do you know how to set the erase width for each erase function?
➜
The frame erase width can be set in the range between 5 mm and
20 mm, variable in 1-mm increments. The default value is 10 mm.
➜
Only 10 mm is available for the center erase width.
➜
To change the setting for the frame erase width, use “Erase Set-
ting” of User’s Choice. (p.7-8)
4
Make any other necessary settings.
5
Enter the number of copies to be made from the Key Pad and then
press the [START] key.
Konica7115_7118.book Page 4 Tuesday, October 16, 2001 10:51 AM
To Next Page
Loading...
